Author:Don Wright

#5: Remounting Module

  The module is remounted onto the new chassis using the same overhead slings as described in Step #2: Demounting. During this phase … ● New seals between the module and chassis frame are installed using materials equal to the original seals. The module will NOT be welded...

0
0

#6: Equipment Reinstallation

All electrical harnesses, hoses and mechanical devices from the old chassis are reinstalled on the new chassis. This step also includes the following: ● All chassis wiring is to be in conduit or looms and grommets are installed at all locations where wiring goes through metal...

0
0

#7: Final Inspection

After the remounting and re-installation of all accessory equipment, we'll complete a final inspection form for each item tested prior to remount. (All electrical system components on the module and chassis that were operating before the remount will be working during this test.) We complete...

0
0

Optional Services

Your remount can involve cosmetic services to restore the interior and exterior appearance of your ambulance. These enhancements may include: - Completely repainting the module with PPG single stage urethane paint system. - Upgrading all lighting to LED. - Install a reflective stripe or graphics....

0
0